While I had the movement out of a Mitchell GC, I thought I would demonstrate the lubrication points on the movement for those who have never worked with one of these cameras. 1. Movement removed from camera 2. Working from top to bottom, 1st is the cam that operates the registration pins. A drop of […]
Lubricating a Mitchell GC Camera Movement Read More »
As we were going over the 3 Blanke cameras we showed last week, we found that the 2 GCs were missing their flywheels, and all of the cameras desperately needed to be serviced after sitting unused for so long. These cameras were previously used to shoot time lapse sequences, and it was common to remove
Mitchell GC sn. 903 Read More »
New arrivals! After many twists and turns with Fedex, we finally took delivery of equipment from the collection of Gunnar Blanke, a filmmaker from the Denver, CO area. Lots of neat stuff in this collection, including a Mitchell NC that was purchased by Lookout Mountain in 1959, two Mitchell GCs, an Akeley Gyro Head, a
An Estate Purchase Out of Colorado Read More »
It’s alive! The FC friction head restoration is finally complete! Here, you can see the friction head supporting Mitchell FC camera sn.8. Mitchell friction heads have a surprising number of parts that all had to be reconditioned or remanufactured in order to make this unit complete again. The casting hides 10 steel friction plates, 14
The Mitchell FC Friction Head Is Complete! Read More »
