From the infancy of the motion picture industry through the first world war, Pathé Freres, established in Paris, France in 1896 by brothers Charles, Émile, Théophile, and Jacques, was the largest producer of films and filmmaking equipment in the world. The brothers got their start in the phonograph business, and later expanded into the emerging […]
The Pathe Professional: The Process of Restoring an Iconic Camera Read More »
New arrival! An Angenieux 25-250mm zoom lens in ARRI B mount with an original ARRI lens support for an ARRI 2B or 2C. This is not up on our website yet, but we wanted to share a quick look at this lens. Check it out!
New Angenieux 25-250 Zoom Read More »
I’ve had a couple of questions recently about vintage motors for various cameras, and before I could answer them, I had to go through the giant pile of motors I’ve collected over the years. I had to see which ones actually work, which ones are repairable, and which ones are so damaged they just need
Reviewing Our Motor Inventory Read More »
I know I said it was going to be a couple of weeks before I reported back on the problem with this Fries VistaVision camera, and at the time, it seemed it was going to take a lot more detective work. It turns out that the problems were simpler than I feared. The first problem
Revisiting the Fries VistaVision Camera Read More »
Recently, my friend and long-time client Ben Ziryab asked if I could diagnose a rough spot in the drive of this Fries Engineering-built VistaVision camera. This camera is based on a Mitchell VistaVision movement that has been installed in a custom Fries camera body with custom electronics. When this camera arrived, it had a profound
Happy Star Wars Day, everyone! May the 4th be with you! Thanks for joining me for part two of this walk down memory lane as I show you a little bit more of what went into the restoration of the Dykstraflex motion control camera system. For the uninitiated among you, this was the groundbreaking motion
The Dykstraflex: Restoring the Motion Control System That Changed The World – Part 2 Read More »
Please join me as I take a walk down memory lane and show you a little bit of what went into the restoration of the Dykstraflex motion control camera system. For the uninitiated among you, this was the groundbreaking motion control camera system that brought to life the most exciting special visual effects that first
The Dykstraflex: Restoring the Motion Control System That Changed The World – Part 1 Read More »
When last we talked, I shared with you a collection of lenses that were used by visual effects master David Allen. With the exception of one particularly stubborn zoom lens, I have finished cleaning, lubricating, and collimating all of the lenses I shared. This week I promised to give you a look at one of
A Fries Mitchell 35R from the Studio of David Allen Read More »
