As there has been nothing simple about bringing Mitchell 46 back to life, it is only fitting that the process of getting the camera securely mounted to the milling machine, and true and parallel to the film plane, was a week-long endeavor. This process had to take into consideration machining the bottom surface of the […]
A Long Week’s Journey Back to Machining Mitchell 46 Read More »
I took some time this week to catch up on a number of smaller projects while I carefully considered what my next step will be on Mitchell #46. Beginning with Mitchell #46 though, I spent a great deal of time considering how to set the camera up so I can begin machining the replacement bottom
A Week of Many Projects Read More »
With my work on the Dykstraflex camera complete, I have returned my attention to Mitchell 46. I dusted off the setup on the mill, re-indicated all the surfaces that needed to be true, and began to make a tool path map. I had transferred the actual position of the camera movement to the aluminum plate
Mitchell 46 Get a New Front Read More »
This past week I had the privilege of doing preventative maintenance on the Dykstraflex camera for the Academy of Motion Picture Arts and Sciences. I serve on the Academy’s Technology and History Subcommittee, and following the restoration of the Dykstraflex camera crane, subcommittee members were concerned that the camera may have developed problems after having
Dykstraflex Camera, Revisited Read More »
