In order to move forward with the machine work on the replacement bottom plate for Mitchell 46, the front plate had to be installed so that three important things could be established: First, the proper thickness of the front plate so that the camera will slide freely on the rackover L-base and still light trap. […]
Mitchel 46: The Glue Crisis Read More »
After the puzzling and disappointing failure of the Loctite adhesive last week (Loctite has never failed me before!) I went through a process of cleaning and degreasing the camera casting and the replacement bottom plate. I spoke to an adhesive expert, and he recommended 3M’s Scotch Weld 2216 2-part epoxy. The process required 4 arms
Is This Glue Really Going to Work? Read More »
The task at hand with Mitchell Standard #46 is now to put metal back where it was unceremoniously removed. This problem is compounded by the fact that so much material was removed from the bottom of the camera casting, that some areas are perilously thin. After three days of contemplating the next steps, and a
Mitchell Standard 46 – Creating the Replacement Bottom and Front Plates Read More »
To go along with our ongoing restoration of Mitchell Standard #46, we are currently in the process of researching the history of the camera’s first owner, the Christie Film Company. Brothers Al and Charles Christie founded the Christie Film Company in Hollywood in 1916 and produced short and feature-length comedies through 1933. The Great Depression
Some Help with a History of the Christie Film Co. Read More »
Progress at last! Sadly Mitchell 46 has been far more butchered than I had anticipated. Still, we shall persevere. I managed to get about 90% of the working pieces out of the camera casting, though the shutter shaft stubbornly remains in place due to corrosion. The screw that holds the focal plane shutter to the
Undoing What Has Been Done – Mitchell Standard 46 Read More »
I have been working minus one thumb this week after having some minor surgery last week, and am unable to lift anything over 5lbs. for a few more days, so a brief update this week. I was able to calculate how much material needs to be added back to Mitchell Standard no. 46, as well
Wounded Camera, Wounded Engineer Read More »
The starting point to restore Mitchell Standard #46 is to determine exactly what and how much material was removed from the original casting. The problem with this particular camera is that the previous owner machined away all of the material that registered the dovetails, the rackover registration plate, and the rack gears that slid the
Assessing the Damage: Mitchell Standard sn. 46 Read More »
Now that the Fox Cine Simplex camera is finished, it is time to take up another long-term restoration project. I won’t be working on this one full time, as there is much other work to be done, but it is finally time to begin bringing Mitchell Standard sn. 46 back to life. In its previous
A New Project Begins: Mitchell Standard sn.46 Read More »
Mitchell Standard #532 was originally purchased by the United States Army Signal Corps in 1943. We acquired it in 2021 from the camera inventory of John Lemmon Films, Inc., a studio based in Charlotte, North Carolina who specialized in clay animation. When the camera arrived in our shop, I found that the variable shutter blade
Mitchell Bi-pack Animation Camera Read More »
We acquired Mitchell Standard #532 in 2021 from the camera inventory of John Lemmon Films, Inc., a studio based in Charlotte, North Carolina who specialized in clay animation. The camera was originally purchased by the United States Army Signal Corps in 1943. When the camera arrived in our shop, I found that the variable shutter
Mitchell Standard sn. 532 Read More »
